Henan Qimeng mechanical equipment Co., Ltd
Henan Qimeng mechanical equipment Co., Ltd
Add to Cart
QMFD5800Wheeled Windrow Turning Machine
Performance features:
QMFD-5800 pull rod Operating Type: (no steering wheel) material fermentation tipper eliminates hydraulic steering wheel tipper.It is a new product produced by our company.It fills a blank that the domestic large wheel-type tipper can't turn around in the same place.Without the steering wheel, the driver only needs to easily control the two pull rods, then the tipper can realize the brake of turning left and right and the turn of 180 degrees in situ, and the hydraulic balance of the steering wheel.The height of the turn-over shaft can automatically rise and fall, and the forced turn-over can be chosen according to the moisture content of the material, and the turn-over can be performed at high speed.This product adopts soft start to turn over and clutch, (domestic similar products all adopt iron-to-iron clutch, which causes serious damage to chains, bearings andaxles) and is equipped with front hydraulic push plate, which does not need to take time and time for the whole pile. Roller hydraulic lift. It greatly saves the site, time, diesel and manpower, and advances the fermentation period.
| Type of tipper | QMFD-5800Mechanical track type tipper |
| Heap width | 5800mm |
| Heap height | 2400mm |
| Row spacing of deposits | 0.8-1m |
| Maximum diameter of material particles | φ250mm |
| Power | 239kwDiesel engine |
|
Torque
|
1230N.m |
| Rated power speed per hour | 2200r/min |
| Working speed | 0-18m/min |
| Driving speed | 50m/min |
| Processing capability | 2800-3000m³/h |
| Overall size | 6.4m×3.4m×3.9m |
| Machine weight | 11500kg |